only converts partial??

only converts partial??

Postby sparky883 » 21 Jun 2009, 01:48

OK here is what I have


General
CompleteName : C:\Users\David Wagner\Desktop\coa-hangover-xvid.avi
Format : AVI
Format/Info : Audio Video Interleave
FileSize/String : 700 MiB
Duration/String : 1h 35mn
OverallBitRate/String : 1 Config_Text_ThousandsSeparator025 Kbps
Encoded_Application : VirtualDubMod 1.5.10.2 (build 2540/release)
Encoded_Library/String : VirtualDubMod build 2540/release

Video
Format : MPEG-4 Visual
Format_Profile : Streaming Video@L1
Format_Settings_BVOP/String : Yes
Format_Settings_QPel/String : No
Format_Settings_GMC/String : warppoint0
Format_Settings_Matrix/String : Default
CodecID : XVID
CodecID/Hint : XviD
Duration/String : 1h 35mn
BitRate/String : 895 Kbps
Width/String : 640 pixel3
Height/String : 224 pixel3
DisplayAspectRatio/String : 2.857
FrameRate/String : 25 Config_Text_FloatSeparator000 fps3
Resolution/String : 24 bit3
Colorimetry : 4:2:0
ScanType/String : Progressive
Bits-(Pixel*Frame) : 0.250
StreamSize/String : 611 MiB (87%)
Encoded_Library/String : XviD 1.0.1 (UTC 2004-06-05)

Audio
Format : MPEG Audio
Format_Version : Version 1
Format_Profile : Layer 3
CodecID : 55
CodecID/Hint : MP3
Duration/String : 1h 35mn
BitRate_Mode/String : VBR
BitRate/String : 118 Kbps
BitRate_Minimum/String : 128 Kbps
Channel(s)/String : 2 channel2
SamplingRate/String : 48 Config_Text_FloatSeparator0 KHz
Resolution/String : 16 bit3
StreamSize/String : 80 Config_Text_FloatSeparator3 MiB (11%)
Alignment/String : Alignment_Aligned
Interleave_Duration/String : 24 ms (0 Config_Text_FloatSeparator60 video frames1)
Interleave_Preload/String : 538 ms
Encoded_Library : LAME3.99a
Encoded_Library_Settings : ABR


now any type i try to convert to only converts 4-15mins, never the whole thing....

I have ver 3.8.0 of the program...

any ideas??
sparky883
 
Posts: 1
Joined: 21 Jun 2009, 01:38

Re: only converts partial??

Postby Cocoon-Dev » 23 Jun 2009, 20:05

Hello,

as soon possible, we create a profile in expert mode to you help.

Now, if you want search a little for help me and give me a little feedback.

You can add in the command line in expert mode the ffmpeg command :

`-t duration'
Restrict the transcoded/captured video sequence to the duration specified in seconds. hh:mm:ss

`-ss position'
Seek to given time position in seconds. hh:mm:ss

Examples :
1/ ( begin at 5 sec ) -ss 00:00:05 ( end at 55 sec ) -ss 00:00:55 thus -ss 00:00:05 -ss 00:00:55 add this in cmd line in expert mode.
2/ ( begin at 5 sec ) -ss 00:00:05 ( encode 2 min's ) -t 00:02:00 thus -ss 00:00:05 -t 00:02:00 add this in cmd line in expert mode.

Have a nice day.
thx for donating
http://www.cocoonsoftware.com/paypaldonate-us.htm
Team Cocoon
User avatar
Cocoon-Dev
Site Admin
 
Posts: 1123
Joined: 24 Sep 2007, 00:54


Return to Expert Users Mode

Who is online

Users browsing this forum: No registered users and 1 guest

cron