Error just after starting conversion TS to DVD

mvd1968
Posts: 3
Joined: 27 Aug 2008, 07:06

Error just after starting conversion TS to DVD

Postby mvd1968 » 27 Aug 2008, 07:14

When trying to convert a .TS file to DVD i get an error.
It only converts about 2 minutes and then QMC says the convertion is OK.
I tried to convert to different formats (DVD, WMv and AVI) but everytime the same problem.
I also recored this .TS file with and Humax PVR. This is an Digital cable reciever.
I edited (cut) the file with the PVR Before i tried to covert it with QMC.
I am using version 3.5.7 and Windows XP. I want to put the final file on to a DVD for playing on a normal DVD player.


Hope that someone can see what i or QMC did wrong?

Regards

========================================

General

ID : 13

CompleteName : D:\humax\files\Wegmisbruikers 17-2-08.ts

Format : MPEG-TS

FileSize/String : 234 MiB

Duration/String : 39mn 6s

OveralBitRate/String : 835 Kbps



Video

ID/String : 221 (0xDD)

MenuID/String : 19003 (0x4A3B)

Format : MPEG Video

Format_Version : Version 2

Format_Profile : Main@Main

Format_Settings_Matrix : Standard

Duration/String : 39mn 6s

BitRate_Mode : CBR

BitRate/String : 545 Kbps

BitRate_Nominal/String : 10000 Kbps

Width/String : 720 pixel3

Height/String : 576 pixel2

DisplayAspectRatio/String : 16/9

FrameRate/String : 25.000 fps3

Standard : PAL

Colorimetry : 4:2:0

ScanType/String : Interlaced

ScanOrder/String : Interlaced_TFF

Bits-(Pixel*Frame) : 0.965



Audio

ID/String : 222 (0xDE)

MenuID/String : 19003 (0x4A3B)

Format : MPEG Audio

Format_Version : Version 1 / Layer 2

BitRate_Mode : CBR

BitRate/String : 256 Kbps

Channel(s)/String : 2 channel2

SamplingRate/String : 48.0 KHz

Resolution/String : 16 bit3

Video_Delay/String : -758ms

Language/String : nl



Text

ID/String : 234 (0xEA)

MenuID/String : 19003 (0x4A3B)

Format : Teletext

Language/String : nl



Menu #1

ID/String : 160 (0xA0)

MenuID/String : 19001 (0x4A39)



Menu #2

ID/String : 180 (0xB4)

MenuID/String : 19002 (0x4A3A)



Menu #3

ID/String : 220 (0xDC)

MenuID/String : 19003 (0x4A3B)

Format : MPEG Video / MPEG Audio / Teletext

List/String : 221 (0xDD) (MPEG Video) / 222 (0xDE) (MPEG Audio, dut) / 234 (0xEA) (Teletext, dut)



Menu #4

ID/String : 200 (0xC8)

MenuID/String : 19006 (0x4A3E)
User avatar
Team Cocoon
Site Admin
Posts: 1301
Joined: 24 Sep 2007, 20:01

Re: Error just after starting conversion TS to DVD

Postby Team Cocoon » 27 Aug 2008, 12:11

Hello and welcome ,

Thank you for your post , we got a similar one a couple of days ago and have not yet come up with an answer ,
Would it be possible for you to send us a small recording about 1 or two minutes from your pvr ( Use rapidshare or any other file sharing free service. That way we will be able to run test in debug mode and come up with some explanation .

Thanking you in advance for your feed back ,

Have a good day.
Team Cocoon
thx for donating
http://www.cocoonsoftware.com/paypaldonate-us.htm
mvd1968
Posts: 3
Joined: 27 Aug 2008, 07:06

Re: Error just after starting conversion TS to DVD

Postby mvd1968 » 27 Aug 2008, 17:35

Team Cocoon wrote:Hello and welcome ,

Thank you for your post , we got a similar one a couple of days ago and have not yet come up with an answer ,
Would it be possible for you to send us a small recording about 1 or two minutes from your pvr ( Use rapidshare or any other file sharing free service. That way we will be able to run test in debug mode and come up with some explanation .

Thanking you in advance for your feed back ,

Have a good day.


Can you tell me what program to use to cut the .TS file???
User avatar
Team Cocoon
Site Admin
Posts: 1301
Joined: 24 Sep 2007, 20:01

Re: Error just after starting conversion TS to DVD

Postby Team Cocoon » 28 Aug 2008, 09:51

Normally to edit the file it would be best to first convert it . How did you obtain that ts file ?

Can you be more precise about its origin ? recording device TV satellite and so on ,

can you also send us a small one or two minute recording of a similar file ( just record it from you device and send it to us .

Thank you.

Have a good day
Team Cocoon
thx for donating
http://www.cocoonsoftware.com/paypaldonate-us.htm
mvd1968
Posts: 3
Joined: 27 Aug 2008, 07:06

Re: Error just after starting conversion TS to DVD

Postby mvd1968 » 29 Aug 2008, 06:37

Team Cocoon wrote:Normally to edit the file it would be best to first convert it . How did you obtain that ts file ?

Can you be more precise about its origin ? recording device TV satellite and so on ,

can you also send us a small one or two minute recording of a similar file ( just record it from you device and send it to us .

Thank you.

Have a good day


Ok, will do.
Origin is an humax pvr 9200 c (cable digital pvr)
User avatar
Team Cocoon
Site Admin
Posts: 1301
Joined: 24 Sep 2007, 20:01

Re: Error just after starting conversion TS to DVD

Postby Team Cocoon » 02 Oct 2008, 16:15

Hello and thank you ,

We are waiting for your file to test it here and see what is wrong and eventually include a modification in our next version due to come out this month.

Have a good day
Team Cocoon
thx for donating
http://www.cocoonsoftware.com/paypaldonate-us.htm

Return to “Conversion Errors”

Who is online

Users browsing this forum: No registered users and 1 guest